China 1600 insulating glass hot press machine for curtain wall Manufacturer, Supplier, Factory
Professional 1600 insulating glass hot press machine for curtain wall manufacturing demands precise pressure control, uniform heat distribution, and reliable automation. For producers running both standard window and door units and high-performance structural glazing, the 1600 insulating glass hot press machine for window and door platform shares the same robust pressing bed as this dedicated curtain wall model. As a high efficiency 1600 IG hot press machine, it reduces cycle time through optimized hydraulic pressure and rapid heating plates. The equipment functions as a 1600mm double glazed unit hot press machine that accepts glass widths up to 1600 mm, making it suitable for large curtain wall lites. When placed in an insulated glass production line 1600 hot press, it connects with washing, spacer assembly, gas filling, and sealing stations for continuous output. The pressure distribution system uses a multi-cylinder layout that compensates for glass thickness variations, while the heating zones recover to setpoint within three minutes after loading. The hot press applies uniform pressure to promote edge seal adhesion and structural integrity for commercial facades.
The 1600 insulating glass hot press machine for curtain wall is built around a stress-relieved steel frame with CNC-machined guide rails, ensuring parallel alignment between the upper and lower platens during every stroke. Its PLC-controlled hydraulic system delivers adjustable pressing force from 0 to 12 tons, allowing fabricators to process both thin laminated glass and thick triple-glazed curtain wall units without breakage. The heating platens use embedded cartridge heaters and independent thermocouple feedback loops to hold surface temperature within ±1 °C across the full 1600 mm width. This level of control is critical for achieving uniform sealant flow and consistent edge compression on insulating glass units destined for high-rise facades. Key operational features include:
- Heavy-duty welded frame with shot blasting and powder coating
- PLC and touch screen HMI with 20-recipe memory
- Adjustable pressing force, speed, and dwell time
- Dual heating zones with independent PID temperature control
- Automatic centering conveyor for glass alignment
- Quick-change platen guides for spacer thickness from 6 mm to 24 mm
- Hydraulic overload protection and emergency stop circuit
- CE-compliant electrical components and safety guarding
- Low-noise hydraulic power unit with oil cooling
- Optional vacuum platen for coated glass processing
Technical parameters:
| Parameter | Specification |
|---|---|
| Platen width | 1600 mm |
| Platen length | 2500 mm (extendable to 3000 mm) |
| Max glass size | 1600 × 2500 mm |
| Min glass size | 300 × 300 mm |
| Glass thickness range | 3–12 mm per pane |
| Spacer width | 6–24 mm |
| Pressing force | 0–12 tons adjustable |
| Hydraulic pressure | 16 MPa |
| Heating temperature | 30–120 °C |
| Temperature uniformity | ±1 °C |
| Cycle time | 25–40 seconds |
| Installed power | 18 kW |
| Power supply | 380 V / 50 Hz / 3-phase |
| Noise level | ≤75 dB(A) |
| Overall dimensions | 3200 × 2200 × 2600 mm |
| Net weight | 2800 kg |
The 1600 insulating glass hot press machine for curtain wall integrates easily with upstream washing, inspection, and spacer application stations as well as downstream gas filling and sealing robots. Its open-frame design permits manual loading or automatic shuttle transfer, and the 1600 mm platen width matches standard double glazed unit dimensions for commercial storefront, window wall, and unitized curtain wall systems. A servo-driven backstop positions glass lites with ±0.5 mm repeatability, reducing edge deviation and sealant consumption. The hydraulic power unit operates at low noise levels under 75 dB(A) and includes oil temperature monitoring to maintain stable pressing performance across extended production shifts. Optional upgrades include a vacuum-assisted platen for sensitive coated glass, a barcode scanning station for recipe selection, and remote diagnostics via Ethernet. Each machine undergoes a 72-hour continuous running test before shipment, and the control cabinet is wired with numbered terminals for fast troubleshooting. Daily maintenance is limited to hydraulic oil checks and platen surface cleaning, with all grease points accessible from the front of the machine. For fabricators producing structurally glazed units, the press applies even pressure while the secondary seal cures, helping prevent air leaks and moisture penetration over the service life of the building envelope.
Related Products
Hot Products
High-Precision 3+2 Axis CNC End Miller for Special-Shaped Aluminum Mullions
3+2 Axis CNC Multi-Angle End Milling Machine for Special-Shaped Aluminum Mullions Engineered for high-precision machining of complex aluminum mullions and curtain wall profiles, this 3+2 axis CNC end miller delivers multi-angle cutting in a single setup. It features a tilting spindle (0°–90°), servo-driven positioning, and automatic tool setting to process special-shaped, stepped, and angled profiles with ±0.1mm accuracy. Designed for window, door, and façade manufacturers, it reduces labor, minimizes setup changes, and ensures seamless mullion-to-frame assembly.
High-Accuracy CNC Circular Saw for Industrial Aluminum Profiles
Maximize productivity and cut with confidence. Our CNC circular saw for industrial aluminum profiles combines heavy-duty construction with micron-level precision. From windows and doors to solar frames and curtain walls, achieve clean, burr-free cuts—every time. Request a quote today.
Heavy-Duty PVC UPVC Windows High Speed Copy Routing Machine
Built with a heavy-duty steel frame and equipped with a high-speed spindle motor, the machine offers stable performance even under continuous, high-volume production demands. The pneumatic clamping system secures profiles firmly in place, minimizing vibration and guaranteeing clean, precise cuts. An intuitive template-based copy routing mechanism allows operators to replicate complex profiles effortlessly, significantly reducing setup time and labor costs.
Heavy-Duty PVC UPVC Colorful Windows Profile High-Speed Seamless Welding Machines with 4 CNC Heads
Professional 4-head seamless welding machine for PVC/UPVC colorful window profiles. Features CNC control, heavy-duty construction, and zero-mark welding. Ideal for high-volume door and window production. Get factory-direct price and specifications.
High-Rigidity 5-Axis Gantry Machining Center for Curtain Wall Profiles
This High-Precision 5-Axis Gantry Machining Center is engineered specifically for the architectural curtain wall industry. Designed to handle large-format aluminum profiles and unitized facade panels, it delivers exceptional rigidity and accuracy for complex milling, drilling, and tapping operations. Ideal for contractors and fabricators seeking to boost efficiency and achieve flawless surface finishes on complex geometries.
Automatic Argon Gas Filling Machine for Insulating Glass Units
This Argon Gas Filling Machine for Insulating Glass Units is a professional, intelligent and portable solution for IGU factory production and on site construction. It injects high purity argon into double and multi layer insulating glass to enhance thermal insulation, sound insulation and anti fog performance. Equipped with high precision control modules and multi dimensional safety protection, it enables four unit simultaneous inflation, separate parameter setting and automatic running. It overcomes flaws of conventional inflation tools including low efficiency, imprecise gas supply, gas waste and complicated operation, suiting both large scale factory manufacturing and flexible mobile working scenarios.
- Related Blog
- Reviews
